Guide · Contractors · 4 min read · Updated 17 November 2026
How to Transport a Mini Digger or Small Plant Safely
Short answer
Mini diggers up to around three tonnes are usually moved on a plant trailer or a beavertail lorry and driven on and off using ramps. The machine is chained at its manufacturer's tie-down points with rated chains, the bucket and arm lowered, and loose attachments secured separately. Local moves start from around £180, with heavier machines and longer distances costing more.
Choosing the right vehicle
The right vehicle depends on the machine's weight, size and whether it can be driven. Micro and mini diggers, small dumpers, rollers and scissor lifts can travel on a plant trailer towed by a suitable 4x4 or on a 7.5-tonne beavertail. Midi excavators, telehandlers and larger rollers need a heavier beavertail or a low loader. Machines that cannot be driven, such as generators, cabins and broken-down plant, are lifted on and off with a HIAB crane lorry.
Towing plant yourself requires the right driving licence entitlement, a vehicle with a sufficient towing limit and a trailer rated for the load. Many contractors find it simpler and safer to book a professional plant transport operator, especially for heavier machines or longer distances.
| Vehicle | Typical machines | Loading method |
|---|---|---|
| Plant trailer | Micro and mini diggers, small dumpers | Drive on via ramps |
| 7.5-tonne beavertail | Mini diggers, scissor lifts, small rollers | Drive on via ramps |
| Heavier beavertail | Midi excavators, telehandlers | Drive on or winch |
| Low loader | Larger excavators, heavy plant | Drive on, often with winch |
| HIAB crane lorry | Generators, cabins, non-running plant | Crane lift |
Information needed to quote
Accurate details avoid the wrong vehicle turning up. The operator needs the make and model, operating weight including any attachments, overall dimensions with the arm folded, whether it runs and can be driven on, and whether it has rubber or steel tracks. Steel tracks can damage some decks and road surfaces, so this matters.
Site access is equally important. Tell the operator about gate widths, overhead cables, low bridges, weight-restricted roads, soft ground, steep slopes and where the vehicle can park to unload. A beavertail needs a long, level, firm area behind it to lower the ramps and drive the machine off safely.
- Make, model and operating weight
- Dimensions with arm and bucket folded
- Running or non-running
- Rubber or steel tracks
- Attachments travelling with the machine
- Access, ground conditions and parking at both sites
Loading and securing the machine
Loading is one of the highest-risk parts of any plant move. The vehicle should be on firm, level ground with the handbrake on and ramps correctly positioned and secured. A competent operator drives the machine slowly and straight up the ramps, with a banksman guiding where visibility is limited. Nobody should stand beside or behind the ramps during loading.
Once on the deck, the machine is positioned so its weight is spread correctly over the axles, the bucket and arm lowered onto the deck, and the engine switched off. It is then chained at the manufacturer's designated tie-down points using rated chains and tensioners, usually at all four corners, with the bucket or arm also restrained. Buckets and breakers travelling separately are strapped or chained down so they cannot slide.
Legal limits and load security
Load security is enforced by the DVSA, and insecure plant is treated very seriously because a falling machine can kill. Drivers and operators can face fines, vehicle prohibitions and prosecution. Using rated chains, correct tie-down points and regular checks during the journey is essential, not optional.
Vehicle weight and size limits also apply. Overloading a trailer or lorry is an offence and affects braking and stability. Very large or heavy machines that exceed standard width, length or weight limits become abnormal loads, moved under the Road Vehicles (Authorisation of Special Types) (General) Order 2003, which requires advance notification to police and highway authorities and may need escort vehicles.
Typical plant transport costs
Costs depend on the vehicle, distance and time on site. Local moves of small plant on a beavertail or plant trailer within around 30 miles start from around £180. Longer moves are priced by mileage and time. Low loader hire for larger excavators typically costs £650–£1,400 per day, with abnormal load notifications and escorts priced separately where needed.
Waiting time on site, out-of-hours moves, multiple machines on one trip and difficult access all affect the price. Moving several machines together on one vehicle is often cheaper than separate trips.
When comparing quotes, check whether the price includes the return leg, chains and ramps, and any time spent waiting for the machine to be ready. A slightly higher quote that covers everything can work out cheaper than a low headline figure with extras added.
Planning a smooth move
Book transport in advance where possible, especially at the start and end of the week when plant hire demand peaks. Make sure the machine is clean enough to load safely, with mud cleared from tracks so it grips the ramps. Fuel levels should be reasonable but not overfilled, and any keys and documentation should travel with the driver.
Have a competent person at each site to meet the driver, confirm the unloading position and sign for the machine. Check the machine for damage before loading and on arrival, and take photos. This keeps the move efficient and gives clear records if anything needs following up.
If the machine is going to a hire customer or a client's site, share the delivery time and contact with them in advance. A driver who arrives to find a locked gate or no one to sign wastes time on both sides and may add waiting charges to the job.
Questions people also ask
Can I tow a mini digger on a car trailer?
Only if the trailer is rated for the machine's weight, your vehicle's towing limit is sufficient and your licence covers the combined weight. Many mini diggers exceed what standard car trailers and licences allow, so check carefully or use a plant transport operator.
How much does it cost to move a mini digger?
Local moves within around 30 miles typically start from around £180 on a beavertail or plant trailer. Longer distances, heavier machines, waiting time and difficult access increase the price.
What is a low loader used for?
A low loader has a deck close to the ground, letting tall and heavy machines such as larger excavators travel within height limits. Many have winches and ramps for loading machines that are heavy or have limited traction.
Written and checked by the PK Transport team. Read our editorial policy.
More guides
Same-Day Courier Cost UK: Van Prices Per Mile Explained
A dedicated same-day courier in a small van typically costs £1.10–£1.50 per mile in 2026, with a minimum charge for short local runs. Long-wheelbase…
Pallet Delivery UK: Costs and How to Prepare a Pallet
Sending a single pallet on a UK next-day service typically costs £45–£110, depending on pallet size, weight and the collection and delivery…
Office Move Checklist: How to Plan a Business Relocation
Plan an office move at least eight to twelve weeks ahead. Appoint one coordinator, arrange a survey, clear out what you no longer need, book lifts…
Courier, Pallet or Lorry? Choosing the Right UK Transport
Use a same-day courier van for urgent, smaller loads that must go direct. Use a pallet network for one to a few pallets when next-day delivery is…
Get a free haulage and transport quote
Tell us what you need and we'll come back with a clear price.
Request a quote