Guide · Businesses · 3 min read · Updated 17 November 2026
Courier, Pallet or Lorry? Choosing the Right UK Transport
Short answer
Use a same-day courier van for urgent, smaller loads that must go direct. Use a pallet network for one to a few pallets when next-day delivery is fine, as it is far cheaper per pallet. Use a part load or dedicated lorry for several pallets, bulky goods or full loads. Plant and machinery need beavertails, low loaders or HIAB lorries.
The main transport options
UK freight transport broadly falls into four categories. Same-day couriers use a dedicated van for a single consignment. Pallet networks consolidate pallets from many customers through overnight hubs. Part loads share space on a lorry already running your route. Full loads use a whole dedicated lorry, from a 7.5-tonne rigid up to a 13.6-metre articulated trailer.
Each option balances speed, cost and handling differently. Choosing well can save a significant amount on regular shipments, and avoid failed deliveries caused by the wrong vehicle turning up.
| Option | Best for | Speed | Typical cost |
|---|---|---|---|
| Same-day courier van | Urgent, small to medium loads | Same day, direct | £1.10–£1.50 per mile (small van) |
| Pallet network | One to a few pallets | Next day or two days | £45–£110 per pallet |
| Part load | Several pallets, flexible timing | Depends on route | Quoted per job |
| Full load lorry | Large volumes, up to around 26 pallets | Dedicated, planned | Quoted per job |
| Plant transport | Machinery and plant | Planned | from £180 local small plant |
When to use a same-day courier
A same-day courier is right when the goods must arrive today, or when they are too valuable, fragile or awkward to pass through a network with multiple handling points. Because the van carries only your consignment, the goods are loaded once and unloaded once, and the driver goes straight from collection to delivery.
The cost is higher per item, so it suits urgent parts, documents, samples, medical supplies and emergency stock. Vans range from small vans for boxes to long-wheelbase and Luton vans for larger items and furniture.
When a pallet network makes sense
If you are sending one to a few pallets and next-day or two-day delivery is fine, a pallet network is usually the cheapest option. Pallets are priced by size and weight band, from quarter pallets to full pallets of around 1,000kg, and many customers' pallets share the same lorries.
The trade-off is extra handling at depots and hubs, so goods must be packed and wrapped well. Delivery times are usually within a window rather than at a precise time, although timed services are available at extra cost. Remote areas and islands may take longer and cost more.
- One to five pallets
- Robust, well-packed goods
- Next-day or economy timing acceptable
- Forklift or tail-lift available at each end
Part loads and full loads
Once you have more than a handful of pallets, or bulky goods that do not fit neatly on pallets, a part load or full load becomes more cost-effective. Part loads use spare space on a lorry already travelling your route, which can be cheaper if your timing is flexible. Full loads give you a whole vehicle for direct, scheduled delivery.
Vehicle choice matters. Curtainsiders allow forklift loading from the side, box vans protect goods from weather, flatbeds suit long items loaded by crane, and tail-lift rigids work for sites without forklifts. Drivers of vehicles over 3.5 tonnes must follow drivers' hours rules, so long-distance timed deliveries need planning.
Moving machinery and awkward loads
Plant and machinery need specialist vehicles. Mini diggers, dumpers and access platforms go on plant trailers or beavertails with ramps. Larger excavators and heavy plant travel on low loaders. Non-running machinery, cabins and generators are lifted with HIAB crane lorries. Loads exceeding legal width, length or weight limits are moved as abnormal loads under the Special Types rules, with advance notification to the authorities.
For these moves, accurate weights, dimensions and site access details are essential. The wrong vehicle can mean a wasted trip or an unsafe lift.
Common mistakes to avoid
The most common mistake is underestimating size or weight. A pallet declared as half height that turns out to be full height, or a load quoted for a small van that needs a long-wheelbase, causes surcharges, delays or a wasted trip. Measure and weigh accurately, and include packaging in the figures.
The second is forgetting about loading and unloading. A lorry without a tail-lift cannot deliver a pallet to an address with no forklift, and a large articulated vehicle may not be able to reach a rural farm or a narrow town centre street. Tell the provider about access at both ends. Finally, check insurance cover for high-value goods rather than assuming the standard limit is enough.
- Measure and weigh accurately, including packaging
- Confirm forklift or tail-lift needs at both ends
- Check access for large vehicles
- Declare the value of high-value consignments
How to decide quickly
Start with three questions: how big and heavy is the load, how soon must it arrive, and how will it be loaded and unloaded? If it is small and urgent, book a same-day van. If it is one to a few robust pallets and next day is fine, use a pallet network. If it is several pallets or bulky goods, compare a part load with a dedicated lorry. If it is machinery, book plant transport.
If you are unsure, describe the load and timings and let the transport provider recommend the right option. A good provider will tell you when a cheaper service will do the job just as well.
For regular freight, review your choices every few months. As volumes grow, a weekly dedicated vehicle or regular part load can become cheaper than sending many single pallets through a network.
Questions people also ask
Is a pallet network cheaper than a courier?
For one to a few pallets with flexible timing, yes, usually much cheaper. A same-day courier costs more because you pay for a dedicated vehicle and driver, but it delivers faster and handles goods less.
How many pallets fit on an articulated lorry?
A standard 13.6-metre articulated trailer typically carries around 26 standard UK pallets on the floor, depending on pallet size and how the load is arranged and weighted.
What is a part load?
A part load uses spare space on a lorry already travelling your route. It can be cheaper than booking a whole vehicle, but timing depends on the route and other consignments on board.
Written and checked by the PK Transport team. Read our editorial policy.
More guides
Same-Day Courier Cost UK: Van Prices Per Mile Explained
A dedicated same-day courier in a small van typically costs £1.10–£1.50 per mile in 2026, with a minimum charge for short local runs. Long-wheelbase…
Pallet Delivery UK: Costs and How to Prepare a Pallet
Sending a single pallet on a UK next-day service typically costs £45–£110, depending on pallet size, weight and the collection and delivery…
How to Transport a Mini Digger or Small Plant Safely
Mini diggers up to around three tonnes are usually moved on a plant trailer or a beavertail lorry and driven on and off using ramps. The machine is…
Office Move Checklist: How to Plan a Business Relocation
Plan an office move at least eight to twelve weeks ahead. Appoint one coordinator, arrange a survey, clear out what you no longer need, book lifts…
Get a free haulage and transport quote
Tell us what you need and we'll come back with a clear price.
Request a quote